Dansons Group - Wire

Below are all the different types of Dansons Group. Select the device of your choice, to download the manual

Contents

CanadianComfortlndustries A Vanderwell Company THERMOSTAT INSTALLATION NOTE Always disconnect power before performing the thermostat installation TOOLS REQUIRED 1 4 hex nutsetter amp driver wi restripper small sized flat head screwdriver INSTALLATION STEPS Follow the thermostat manufacturer s installation procedures 1 Unplug the stove s power cord from the wall outlet 2 Remove the 6 x 1 4 hex screws from the slotted back access panel 3 Unscrew the control board from the side of the heater 2 x 1 4 hex screws 4 Unplug the 9 pin wire harness from the back of the board 5 Install the thermostat module by plugging it into the 9 pin plug on the back of the control board 6 Locate the thermostat terminal block marked T STAT INPUT found on ...